Screw air compressor chassis how to maintain?
发布时间:2017-04-29 08:35:00 浏览次数:
摘要：Many manufacturers and users in the maintenance of air compressor, screw compressor, often ignore the case of mai
Many manufacturers and users in the maintenance of air compressor, screw compressor, often ignore the case of maintenance and repair, the screw compressor in the screw compressor chassis maintenance is very important, the following Xiaobian for you on the air compressor, screw compressor chassis maintenance method:
1, first of all, the first stop, so that the air compressor is in a state of stop, and it will be completely cooled, and the pressure can be checked after the start;
2, and then open the case, check the balance of iron pin is firm;
3, check the bolt, see if it is loose;
4, look at the internal parts of the surface finish, check whether there is wear and lack of meat phenomenon;
5, rotating parts with flashlight light, to see whether the gap is uniform, whether the wear and tear; and then the chassis inside and outside the repair, to see if there is a crack, if necessary, the need for flaw detection.
6, the need to use a wrench to move the balance of the link between the iron parts, to see if there are no loose or eccentric parts;
The six step is to screw air compressor chassis maintenance method, screw air compressor maintenance is very important, in the maintenance of the screw compressor at the same time, don't forget to carry out maintenance on the screw compressor case!
